Tips And Tricks; Maintenance; Accessories; Repairs - Metabo BHA 18 Mode D'emploi

17026813_0907 BHA 18 NAFTA.book Seite 9 Dienstag, 9. Oktober 2007 1:20 13
Removing the tool:
Turn tool lock (1) in direction indicated by arrow
(a) and remove tool (b).

8 Tips and Tricks

Only moderate pressure is required for hammer
drilling. Applying a high degree of pressure does
not increase performance.
When drilling deep holes, remove the drill bit peri-
odically from the hole to remove dust.
When drilling in tiles and other brittle materials:
Set the operating mode to

9 Maintenance

The vent slots of the machine should be cleaned
periodically.

10 Accessories

Use only genuine Metabo accessories.
If you need any accessories, check with your
dealer.
For dealers to select the correct accessory, they
need to know the exact model designation of your
power tool.
See page 4.
A Chargers
B Battery packs with different capacities.
Use battery packs only with voltage suitable
for your power tool.
C Metabo carrying strap
D Tools with SDS-Plus shank
E Connecting piece
F Geared chuck
G Twist drills for metal and wood
H Screwdriver bit
I Special grease (for lubricating the tool
shanks)
For complete range of accessories, see
www.metabo.com or the main catalogue.

11 Repairs

Repairs to electrical tools must be carried out by
qualified electricians ONLY!
Any Metabo power tool in need of repair can be
sent to one of the addresses listed in the spare
parts list.
Please enclose a description of the fault with the
power tool.

12 Environmental Protection

Metabo's packaging can be 100% recycled.
Scrap power tools and accessories contain large
amounts of valuable resources and plastics that
can be recycled.
These instructions are printed on chlorine-free
bleached paper.
"Drilling".

13 Technical Specifications

Explanatory notes on the specifications on page 2.
Changes due to technological progress reserved.
U
Ah
m
n
1
ø
max.
s
max.
W
During operation the noise level can exceed
85 dB(A).
The technical specifications quoted are subject to
tolerances (in compliance with the relevant valid
standards).
ENGLISH
= Voltage of battery pack
= capacity of the battery pack
= weight
= No-load speed
= maximum solid drill diameter
= maximum impact rate
= Single impact force
Wear ear protectors!
ENG
9