Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
cups, utensils and breast pump parts. They must be able to withstand
boiling water in order to be sterilized in this unit. Please check with the
manufacturer of the other items.
As parents we know how important your baby's well being is and this
appliance will help you make your baby's bottles and other feeding
equipment more sterile.
Please read through the ENTIRE INSTRUCTION BOOK including the
IMPORTANT SAFEGUARDS before using your new Dr. Brown's Natural
Flow
Deluxe Bottle Sterilizer for the first time. A copy of these
®
instructions is also available online at www.drbrownsbaby.com.
IMPORTANT:
Pour water into device before turning on.
PARTS:
A. Top cover
B. Main cover
C. ON/OFF Button
D. Cycle Start Button
TO USE:
1. Before running this appliance, it is
important that all bottles, bottle parts
and/or other accessories are clean. They must be washed,
rinsed and empty.
2. Position the appliance on a flat surface and out of reach of children
where it cannot be knocked or moved during operation. Remove
the tray.
3. Remove the measuring cup and tongs from the unit.
4. Fill the measuring cup to the FILL LINE (3 oz/80 ml) with
water and pour the water INTO THE BOTTOM OF THE
HEATING CHAMBER. For best performance, use distilled
water. Using tap water will require the monthly descale
procedure.
NOTE:
DO NOT EXCEED the recommended amount of water. Please
note that hard water may increase build up or other residue on the
heating plate. If you have hard water, we recommend that you use
distilled water.
E. Cycle Indicator
Lights
F. Tray
G. Tongs
H. Measuring Cup
E
D
C
H
G
A
B
F
5
Publicité
Table des Matières
