Gladiator GEARLOFT GALS48M4JG Instructions D'assemblage page 7

3.
Connect the racks
P1
F1
P1
F1
Lay two rack sections upside down on the floor. Assemble the
rack sections (P1) together using M8 - 1.25 x 15 Socket-head
cap screws (F1) (4). Repeat this with the other remaining two rack
sections.
5.
Attach double rack sections
P1
P1
F1
P1
P1
F1
Attach the two double rack sections together using
M8 - 1.25 x 15 Socket-head cap screws (F1) (4).
7.
Attach lower center supports
P6
P1
F1
Attach the two lower center supports (P6) to the rack assembly
using M8 - 1.25 x 15 Socket-head cap screws (F1) (4).
F1
M8 - 1.25 x 15 Socket-head
cap screw
F1
M8 - 1.25 x 15 Socket-head
cap screw
P1
F1
M8 - 1.25 x 15 Socket-head
cap screw
4.
Attach the racks brackets
P1
Attach the rack connection brackets (P7) to both sides of the two
bolted together rack sections using M8 - 1.25 x 15 Socket-head
cap screws (F1) (8). Repeat this on the other two bolted together
rack sections.
6.
Attach lower corner supports
P4
F1
Attach the four lower corner supports (P4) to the rack corners
using M8 - 1.25 x 15 Socket-head cap screws (F1) (8).
P1
P7
F1
M8 - 1.25 x 15 Socket-head
cap screw
F1
F1
M8 - 1.25 x 15 Socket-head
cap screw
P1
7