DS Produkte Z 00159 Mode D'emploi page 27

❐ Make sure that the device is switched off before you
change the roller.
❐ The roller contains fragile parts. Handle the roller
with care to prevent damage.
A roller must be replaced if it is damaged or worn.
1. Take off the protective lid.
2. Hold the device so that the roller cap
is pointing up and push the release
button away from the roller. The roller
will "pop" out.
3. Pull the roller out of the bracket and
dispose of it.
4. Use your fi nger to push a new roller
out of the protective sleeve and hold
the roller by the cap between your
fi ngers.
5. Push the roller into the bracket on
the device until it audibly locks into
place.
27