Table des Matières
Publicité
Control panel
Connect the power supply unit to the wall outlet, the LED indicator will flash on the display.
It is now possible to turn on the infrared emitters, the lights and the music.
1. Start
Press
to turn on the sauna, the indications '-' '' - 'will appear and the light will come on.
Press
to start preheating
2. Temperature settings
Once the sauna is on:
press
/
on the left side of the control panel to set the temperature between 35 ° C to 65 ° C, 1 press = 1 ° C.
The screen displays the programmed temperature for 10 seconds and then displays the sauna room temperature again.
Note:
The maximum air temperature achievable in the cabin may be lower than the desired temperature. It depends on the
temperature outside the cabin. Default temperature = last programmed temperature.
Timer settings
Press the
/
buttons to select the duration of use, from 5 min to 60 min. 1 press = 1min.
If the time display panel displays - -, the panels remain on, when the timer indicates less than 1 minute, an alarm will sound, once
the timer reaches 00, the panels will automatically turn off.
Quick ignition:
Press
for the sauna to automatically heat up to 45 ° C for 30 minutes.
Light color:
Press
to turn on the LEDs. Long press
of the session duration. Under these conditions, press again
seconds, the LED menu closes and returns to the temperature and the remaining time.
Ceiling light:
Briefly press
, to turn the ceiling light on or off.
Music player:
when the sauna is running, press to open the bluetooth pairing, the connection remains open for 7 seconds, the temperature
dial displays "bt", the time display shows volume XX (from 1 to 26). Activate bluetooth on your smartphone and search for the
connection to your sauna. After successful pairing, you can listen to your music. if no action is taken on the buttons for 8 seconds,
the display returns to the temperature and the remaining time.
.Press
and
/
USB player:
when the sauna is running, press
dial displays "USB", the time display shows volume XX (from 1 to 26). Connect your USB key to the front of the control panel,
you can listen to your music. if no action is taken on the buttons for 8 seconds, the display returns to the temperature and the
remaining time.
21
Using the sauna
the letters "LE" instead of the temperature displayed. "0X" is displayed instead
to change the sound volume.
to open the bluetooth pairing, the connection remains open for 7 seconds, the temperature
A general stop button is present on the ceiling
to change the colors. if no action is taken on the buttons for 8
Publicité
Table des Matières
