JUISSEN Slow Juicer Manuel De L'utilisateur page 9

5. TROUBLE SHOOTING
Before you call for service review the trouble shooting tips first.
Problem
Juicer not plugged in.
No power to juicer.
Incorrect assembly.
Bowl has been overfilled with material.
Motor has stopped.
Overuse has caused the motor to shut down
as a precaution to overheating.
16
Leaking from beneath Rubber plug on base of bowl not correctly
EN
inserted.
the bowl.
Natural color from juicing materials.
Stain on the bowl,Strai-
ner, Spinning brush.
Juicing noise from squeezing screw.
Squeaking noise
during operation.
Damage to the strainer. Frozen foods,
substance or too much material in the bowl.
Possibles causes What to do
Check the juicer is
plugged in.
Reassemble
according to the
instructions.
Press the
power button
and clear the clog. May
need to be try this a
few times.
Switch off and let the
motor cool
using aging.
Rubber plug
of bowl not
inserted.
This is perfectly normal.
To reduce
ensure you
clean the appliance im-
mediately after use.
This is perfectly
mal. Ensure you do not
overload the juicer.
ice, pips, seeds, unknown Ensure you
instructions
on the correct use of
the juicer. Do not over-
fill the juicer.
6. SYSTEM GUARANTEE FOR THE END USER
• The distributor guarantees its systems for two years against any manufacturing defect, in accordan-
ce with that laid down in Law RD 1/2007, 16 November (Consolidated text on the General Law for the
Defence of Consumers and Users).
• (B-60326279) shall not offer guarantee for parts suffering usual wear and tear, lack of maintenance,
hits and other faults due to the improper use of the system outside the specifications and operating
limitations indicated by the manufacturer.
• The guarantee will not be valid in the event of misuse, or in those cases where it has been modified
the juicer or repaired by personnel that do not belong to the distributor or the official TAS, or when non original
spare parts have been used.
• All the replaced parts shall remain the property of (B-60326279).
reverse
to try • (B-60326279) shall be held responsible for the lack of conformity when this refers to the origin,
identity or compliance of the products, according to its nature and purpose.
• For any claims under guarantee you are required to provide the receipt of purchase. The term of the
two year guarantee starts on the date of purchase of the system in your distributor.
• Should any defect be detected upon unpacking the system, which may be attributable to the trans-
before
port, please inform the distributor immediately and enclose the receipt of purchase.
• The guarantee does not cover any failure related to the misuse of the device, particularly when it has
been used for non-domestic purposes or it has undergone modifications and/or adaptations, which
were necessary for countries or places for which it was not initially designed.
• The warranty does not cover failures caused by a poor power supply.
on base
correctly
• Should any problem with the device arise while it is under guarantee, please contact your distributor.
discoloration
rinse and
nor-
read the
carefully
17
EN