Loading Paper; Fanfold Paper - TallyGenicom 7265 Manuel D'utilisation

Quick start-up

Loading paper

Your printer can process both fanfold paper and single sheets. For information on the
supported paper sizes, please refer to page 25 (Paper specifications).
You should only use those paper types which are approved for this printer. For more infor-
mation, please refer to the Reference Manual on the Online CD-ROM.

Fanfold paper

Make sure that the printer is set for fanfold paper printing. If
necessary, change the paper type (see page 14, Changing the
paper type).
Raise the front cover.
Not available on some printer types.
Remove the bottom cover A.
Open the right and left tractor flaps.
A
Release the coloured latch lever of the left-hand tractor and
align the tractor so that the first printing position on the paper
matches the X mark on the printer housing.
Lock the coloured lever again.
Place fanfold paper into the left-hand tractor.
Paper handling
15