Technical Specifications - Neumann.Berlin KK 104 S Notice D'emploi

In the case of the KK 104 S, the foam insert of the headgrille can be removed sepa-
rately for cleaning.

3. Technical Specifications

KK 104 S
Directional pattern ......................................................................................... Cardioid
Frequency range .................................................................................... 20 Hz...20 kHz
Equivalent SPL DIN/IEC 651 ............................................................................ 31 dB-A
Equivalent SPL CCIR 468-3 ................................................................................. 42 dB
1)
Sensitivity ....................................................................1.7 mV/Pa ± 1 dB –55.4 dBV
Max. SPL for less than 0.5%/3% THD
Weight ..................................................................................................................120 g
Diameter ............................................................................................................ 48 mm
Length................................................................................................................ 70 mm
KK 105 S/KK 105 HD
Directional pattern ................................................................................ Supercardioid
Frequency range .................................................................................... 20 Hz...20 kHz
Equivalent SPL DIN/IEC 651 ............................................................................ 33 dB-A
Equivalent SPL CCIR 468-3 ................................................................................. 44 dB
1)
Sensitivity .......................................................................1.3 mV/Pa ± 1 dB –58 dBV
Max. SPL for less than 0.5%/3% THD
Weight ..................................................................................................................120 g
Diameter ............................................................................................................ 48 mm
Length................................................................................................................ 70 mm
1)
At 1 kHz into 100 kOhm rated load impedance. 1 Pa 94 dB SPL.
2)
THD of microphone amplifier at an input voltage equivalent to the capsule output at the specified SPL.
2)
.................................................... 148/153 dB
2)
.................................................... 150/155 dB
KK 104/105 S
EN
5