Work Sharp WS2000 Mode D'emploi page 10

1
Problem
Cannot get damage removed from tool
cutting edge
Solutions
• You have not spent enough time on the
coarse grit during sharpening. Ensure all
damage at cutting edge has been removed
before proceeding to the finer grit.
• The back of your tool is not flat. Flatten
the tool back on the topside of the grind-
ing wheel.
• Abrasive needs to be cleaned or replaced.
Problem
Sharpening takes excessively long time
Solutions
• Abrasive needs to be cleaned or replaced.
• Tool being sharpened is excessively dam-
aged and should be reground or re-shaped
using the coarse abrasive.
Problem
Excessive vibration
Solutions
• Grinding wheel is damaged. STOP IMME-
DIATELY and inspect wheel for damage.
• WORK SHARP™ unit not placed stably on
workbench or work area. Clamp to work
bench with mounting tabs for best perfor-
mance and stability.
• If excessive vibration continues, call a
customer service agent for direction.
Problem
Tool is not sharp
Solutions
• Back of chisel is not flat at the cutting
edge.
www.worksharptools.com
• Bevel has not been sharpened all the way
to the cutting edge.
• Burr has been created at cutting edge.
Follow repeated "plunge and pull" method
for best results in the chisel sharpening
port.
• Marks from previous (coarser) grit have
not yet been removed.
Problem
Tool will not stay sharp
Solutions
• The burr at the cutting edge was not re-
moved. Follow repeated "plunge and pull"
method for best results.
• Tools made of softer steels do not hold an
edge as long and may need to be sharp-
ened more often.
Problem
Wheel stall
Solutions
• You are pushing too hard. Apply less load
force in sharpening port.
• Light pressure during sharpening yields
best results.
For Technical Support
1-800-418-1439
(toll-free USA and Canada only)
1-541-552-1301
Please call 6:00 AM–3:30 PM Pacific Time.
www.worksharptools.com
Warranty
2-year warranty on all WORK SHARP™ components; excludes abrasives
Your WORK SHARP™ is warranted to
be free of defects due to workmanship
or design for 2 years from the purchase
date. If your WORK SHARP™ fails to
operate, or if any operating problem oc-
curs, contact WORK SHARP™ Technical
Service at:
1-800-418-1439
(toll-free USA and Canada only)
1-541-552-1301
Please call 6:00 AM–3:30 PM Pacific Time.
Do not return this product to the store
where you purchased it. Do not attempt
any service or repairs other than those
suggested by a Tech-
WORK SHARP™
nical Service Representative (TSR).
During the period of warranty,
WORK
will, at our discretion, repair
SHARP™
or replace this product free of charge
and will refund Standard Ground UPS
postage or shipping charges providing
that the following conditions are met:
1. A copy of the proof of purchase is
provided.
2. The product has been operated for
the purpose intended as described
in the operating instructions and
has not been abused or mishandled
in any way.
3. The product has not been disman-
tled and no service or repairs have
been attempted other than those
suggested by a
WORK SHARP™
TSR.
1
4. The Return Goods Authorization
number (RGA #) (assigned by the
WORK SHARP™ TSR) is written
on the shipping label.
Please make certain to package items in
such a way as to eliminate further dam-
age during shipping. Ship via a traceable
carrier and properly insure the package.
No CODs are accepted. Unapproved
shipping charges are nonrefundable.
Complete and mail back the Warranty
Registration & Customer Survey in the
box, or register online:
WORK SHARP™
Professional Tool Manufacturing, LLC
WORK SHARP™
210 E. Hersey St.
Ashland, OR 97520 USA
www.worksharptools.com
Please Fill in the Following
for Your Records.
WORK SHARP™ Serial Number:
_____________________
Date of Purchase:
_____ / _____ / _______
Purchased from:
_____________________