Maintenance And Storage; Residual Risks; Transport - Landxcape LX795 Mode D'emploi

Masquer les pouces Voir aussi pour LX795:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 39
have come to a complete stop.
o) For machines used in public areas, that warning
signs shall be placed around the working area of
the machine. They shall show the substance of
the following text:
WARNING! Automatic lawnmower! Keep away
from the machine! Supervise children!
2. ADDITIONALLY WHEN THE APPLIANCE IS
OPERATING AUTOMATICALLY
a) Do not leave the machine to operate unattended if
you know that there are pets, children or people in
the vicinity.

MAINTENANCE AND STORAGE

When the mower is turned upside down the
power key must always be switched off.
The power key should be switched off during all
work on the mower's underframe, such as cleaning
or replacing the blades.
a) Keep all nuts, bolts and screws tight to be sure
the appliance is in safe working condition.
b) Inspect the robotic lawnmower each week and
replace worn or damaged parts for safety.
c) Check especially that the blades and blade disc
are not damaged. Replace all blades and screws
at the same time if necessary so that the rotating
parts are balanced.
d) Ensure that only replacement cutting means of the
right type are used.
e) Ensure that batteries are charged using
the correct charger recommended by the
manufacturer. Incorrect use may result in electric
shock, overheating or leakage of corrosive liquid
from the battery.
f) In the event of leakage of electrolyte flush with
water/neutralizing agent, seek medical help if it
comes into contact with the eyes etc.
g) Servicing of the appliance should be according to
manufacturers' instructions.
Recommendation
To connect the machine and/or its peripherals only to
a supply circuit protected by a residual current device
(RCD ) with a tripping current of not more than 30
mA.

Residual risks

To avoid injuries, wear protective gloves when
replacing the blades.
10

Transport

The original packaging should be used when
transporting robotic lawnmower over long distances.
To safely move from or within the working area:
a) Press the STOP button to stop the mower.
You select the four digit PIN code when you start
the mower for the first time.
b) Always switch off robotic lawnmower if you intend
to carry the mower.
c) Carry the mower by the handle at the front under
the mower. Carry the mower with the blade disc
away from the body.
RF exposure requirements
To satisfy RF exposure requirements, a separation
distance of 200mm or more should be maintained
between this device and persons during device
operation.
To ensure compliance, operations at closer than this
distance is not recommended. The antenna used for
this transmitter must not be co-located in conjunction
with any other antenna or transmitter.
Safety Warnings for battery pack inside the tool
a) Do not dismantle, open or shred battery pack.
b) Do not short-circuit a battery pack. Do not
store battery packs haphazardly in a box or
drawer where they may short-circuit each
other or be short-circuited by conductive
materials. When battery pack is not in use, keep
it away from other metal objects, like paper clips,
coins, keys, nails, screws or other small metal
objects, that can make a connection from one
terminal to another. Shorting the battery terminals
together may cause burns or a fire.
c) Do not expose battery pack to heat or fire.
Avoid storage in direct sunlight.
d) Do not subject battery pack to mechanical
shock.
e) In the event of battery leaking, do not allow
the liquid to come into contact with the skin
or eyes. If contact has been made, wash the
affected area with copious amounts of water
and seek medical advice.
f) Seek medical advice immediately if a cell or
battery pack has been swallowed.
g) Keep battery pack clean and dry.
h) Battery pack gives its best performance when
it is operated at normal room temperature (20
°C ± 5 °C).
EN

Publicité

Table des Matières
loading

Table des Matières