Basics; Faceplate - Kenwood KDC-BT365U Mode D'emploi

BASICS

Faceplate

Volume knob Loading slot
Detach button
Flashes when the unit enters searching status.
Attach Detach
To
Turn on the power
Adjust the volume
Select a source
Change the display information*
* 1
For : The power will automatically turn off after 20 minutes when in standby mode (Auto Power Off).
* 2 : You can also turn off the display information by pressing DISP repeatedly.
For
Display window
/ / :
How to reset
Press the switch twice
within 5 seconds after
detaching the faceplate.
On the faceplate
Press .
• Press and hold to turn off the power. *
Turn the volume knob.
Press repeatedly.
2
Press DISP repeatedly. ( 28)
Remote control (RC-406)
/
/
:
Lights up when
Bluetooth
connection is
established.
( 15)
optionally purchased remote control.
available.
How to replace the battery
On the remote control
Press and hold SRC to turn off the power.
1 ( Pressing SRC does not turn on the power. )
Press
Press ATT during playback to attenuate the sound.
• Press again to cancel.
Press SRC repeatedly.
( Not available )
Remote sensor (Do not
expose to bright sunlight.)
Pull out the
insulation sheet
when using for
the first time.
: Can be remotely controlled with an
: Remote control functions are not
or .
ENGLISH
3