Dirna SUN 150086002K Instructions De Montage page 18

SUN
EN
Figure 11 shows the rear position.
11
Each side support must be secured with 2
screws (T): a central attachment screw plus
a safety screw to prevent the support from
turning.
The supports have several positions; choose the
most appropriate for each occasion.
12
Once the supports are in place, secure the unit
to the required panel, making boreholes in it
(4) in accordance with the attached dimensions,
and ensure the correct anchoring.
See attached diagram
12
36 mm
90 mm
290 mm
18
11
For correct connection, we recommend
acquiring the cabling kits, since these guarantee
the correct cable section and also are fitted with
suitable fuses.
dirna
, s.a.
T