Philips Viva Collection HR3551 Mode D'emploi page 4

The appliance is intended
•
to be used in household
only.
Caution
Switch off the appliance
•
and always disconnect
from supply if it is
left unattended and
before assembling,
disassembling,
approaching parts that
move in use or cleaning.
Never use any
•
accessories or parts from
other manufacturers or
that Philips does not
specifically recommend. If
you use such accessories
or parts, your guarantee
becomes invalid.
Do not exceed the
•
maximum indication on
the blender jar.
Do not exceed the
•
maximum quantities
and processing times
indicated in the relevant
table.
The appliance can only
•
be switched on if the
blender jar is assembled
on the motor unit
correctly.
EN
8
In order to avoid a hazard
•
due to inadvertent
resetting of the thermal
cut-out, this appliance
must not be supplied
through an external
switching device, such as
a timer, or connected to
a circuit that is regularly
switched on and off by
the utility.
Blender
Warning
Never reach into the
•
blender jar with your
fingers or an object while
the appliance is running.
Make sure the blade unit
•
is securely fastened to
the blender jar before you
assemble the blender jar
onto the motor unit.
Do not touch the cutting
•
edges of the blender
blade unit when you
handle or clean it. They
are very sharp and you
could easily cut your
fingers on them.
If the blade unit gets
•
stuck, unplug the
appliance before you
remove the ingredients
that block the blades.