Information Codes - Samsung WA54M8750A Manuel Utilisateur

Troubleshooting
Problem
Has odors.
If a problem persists, contact a local Samsung service center.

Information codes

The washer may display information codes to help you understand what is occurring with
your washer better.
No Code
1
2
3
4
60 English
WA8700M_WA54M8750A_DC68-03774B-02_EN.indd 60
• Excessive suds collect in recesses and can cause foul odors.
• Run a Self Clean cycle to sanitize periodically.
• Dry the washing machine interior after a cycle has finished.
The Water Level sensor is not working properly.
• Turn off the washer, unplug it, wait 30 seconds, and then plug
the washer in again. If the information code remains, contact
a Samsung customer service center.
1C
NOTE
If the washer displays "1C", the washer will automatically drain
for 3 minutes. During this time, the POWER button is inoperative.
Check the motor for operation.
3C • Try restarting the cycle.
• If the problem continues, call for service.
Water is not supplied.
• Make sure the water taps are open.
• Make sure the water hoses are not clogged.
• Make sure the water taps are not frozen.
Make sure the washing machine is operating with sufficient
•
water pressure.
4C
• Make sure that the cold water tap and the hot water tap are
properly connected.
• Clean the mesh filter as it may be clogged.
NOTE
If the washer displays "4C", the washer will automatically drain
for 3 minutes. During this time, the POWER button is inoperative.
• Make sure the cold water supply hose is firmly connected
4C2 to the cold water tap. If it is connected to the hot water tap,
laundry may be damaged when some cycles are run.
Action
Meaning
2017-04-18 9:59:53