Self Clean - Samsung WA54M8750A Manuel Utilisateur

Self Clean

WA8700M_WA54M8750A_DC68-03774B-02_EN.indd 55
Self Clean is a self-cleaning cycle that removes
mold that may occur inside the washer.
1. Press POWER.
2. Select Self Clean. Once Self Clean is
selected, the only function that can be
set is Delay End.
3. Press and hold START/PAUSE. The Self
Clean cycle starts.
CAUTION
• Using Self Clean, you can clean the drum
without using a cleansing agent.
• Never use Self Clean when laundry is
in the washer. This may cause damage
to the laundry or a problem with the
washer.
NOTE
The Self Clean Auto Led Function
• If the "Self Clean" LED is lit after a wash,
it means that tub (drum) cleaning is
required. Remove the laundry from the
washing machine, turn the power on, and
clean the drum by running Self Clean.
• If you do not run Self Clean, the "Self
Clean" LED turns off. However, the "Self
Clean" LED will light again after five
washes. Not running Self Clean at this
point will not cause a problem with the
washing machine. However, we strongly
recommend you run a Self Clean cycle
as soon as possible to remove mold and
prevent unpleasant odors.
• Although the Self Clean Auto LED lights
once a month or so, the frequency may
differ depending on the number of times
the washing machine is used.
English 55
2017-04-18 9:59:52