Carrier KJR-120G1/TFBG-E Manuel D'utilisation page 21

9. OPERATION
Turbo/PTC function (on some models)
Press the Turbo button to activate/deactivate the turbo/PTC function.
Back/Turbo
When the turbo/PTC function is activated,the
The Turbo/PTC function makes the unit work extra hard to reach
your present temperature in the shortest amount of time possible.
• When you press the Turbo button in COOL mode, the unit will blow
cool air with strongest wind setting to jump-start the cooling process.
• When you press the Turbo button in HEAT mode, for units with PTC
heat elements, the PTC will activate and jump-start the heating process.
Lift panel function (only for some cassette specific panel)
Mode
2. Press the button "+" and "-" to control the lift and drop of the panel.
Pressing the "+" button can stop the panel,while it is dropping.
Pressing the "-" button can stop the panel,while it is lifting.
1.When the unit is off，Press the Mode button long to activate
the lift panel function.The
The F2 mark appears when
the panel is adjusted.
18
mark appears.
mark will flash.
G B