Before The First Use - Bodin 352409 Mode D'emploi

BEFORE THE FIRST USE

Before starting operations in this section:
• Find a place where there is power supply nearby.
• Install the exhaust hose and adjust the window position well.
• The supplied small white clips must be mounted on the window
kit.
• Insert the power cord into a grounded AC220~240V/50Hz socket.
• Press the power button to turn on the air-conditioner.
• Set the temperature range: 16°C-31°C.
• Check whether the exhaust hose has been mounted properly.
• When using functions on cooling and dehumidifying, allow at
least 3 minutes between powering off and powering on.
USE
Auto Mode
• The device will automatically select the heating, cooling or
dehumidifying mode according to the current room temperature.
– Room temperature lower than 23 degrees, the device starts
heating to a temperature of 21 degrees.
– Room temperature between 23 and 26 degrees, the device
starts to dehumidify to a temperature of 23 degrees.
– Room temperature above 26 degrees, the device starts
cooling to a room temperature of 25 degrees.
Cooling operation
• Press the "Mode" button till the "Cool" icon appears.
• Press the or button to select a desired room
temperature.
• Allow around 5 minutes for the cooling to start.
• Press the "wind" button to adjust airflow speed.
Dehumidifying operation
• Press the "Mode" button until the "Dehumidify" icon appears.
• The temperature will automatically be selected.
• The fan speed will automatically be selected.
Fan operation
• Press the "Mode" button till the "Fan" icon appears.
• Press the "wind" button to adjust airflow speed.
Timer operation
Timer ON setting
Instruction manual
EN
9