Casselin XLERATOR ECO Mode D'emploi page 22

MAINTENANCE CODES HAND DRYER
One short flash /
1 long blink
One short flash /
2 long flashes
2 short flashes /
1 long blink
CODES ENGINE PROBLEM
1 long blink /
3 short flashes
1 long blink /
4 short flashes
CODES PROBLEM HEATER
2 long flashes /
3 short flashes
NOTE
Malfunctions mentioned above are cited for information only and remain virtual. For any hesitation, contact
your dealer.
The pre-filter clogged
Filters very clogged
In blocking mode
Motor current overload
Motor current overload
heating element short-
circuited
or incorrect
Clean the prefilter
Clean the prefilter
Clear obstructions
Replace motor
Replace motor
Replace the heating
element
The hand dryer still
running
The hand dryer stops
The hand dryer stops
until the obstruction is
cleared
The hand dryer stops
The hand dryer stops
The hand dryer stops
EN