User's Settings; Alarm Clock - CBE PC-540HY Instructions D'emploi

230V CONNECTED!
OPTIONAL
SOS LIGHTS ON
BATTERY SAVER
SEATS ALARM
L/H LKR OPEN
R/H-BK LKR OPEN
DOOR OPEN
ALM LKR L/H
ALM LKR R/H-BK
ALM DOOR OPEN
ALM VOLUMETRIC
USER S SETTINGS '
s
To be set the control panel must be in "ON" mode.
s
To enter the set mode, press the "PROG" button (ref. 04) for more than 2 seconds.
s
To run through the menu press arrow keys (ref. 05).
s
To select a function press the "PROG" button (ref. 04).
s
To save the settings, press the "PROG" button (ref. 04); to exit without saving wait 10 seconds
for automatic exit without pressing any key.
s
To go back to previous menu select " MENU ".
s
To exit the set mode, select "EXIT" in main menu (exit is confirmed by the message "PROG. OK
!").

ALARM CLOCK

MENU à ALARM CLOCK
Select the function
à
-ALARM CLOCK REGULATION
Set alarm clock time (hh / mm).
-ALARM
Activation/deactivation of alarm clock (ON / OFF).
CLOCK
MENU à CLOCK
Select the function
à
-CLOCK REGULATION
Set clock time (HH / mm).
-DATE REGULATION
Date set (dd / MM / YYYY).
It displays that the 230V net is connected when engine is on
Segnala che la funzione non è impostata.
It displays that light emergency fuse is inserted.
It displays the intervention of minimum voltage device.
Alarm: cabin seats in wrong position for driving.
It indicates that LEFT locker is open when engine is on.
It indicates that RIGHT and/or rear locker is open when engine is on.
It indicates that cab's and/or van's door is open when engine is on.
Alarm in case of LEFT locker forcing.
Alarm in case of RIGHT and/or rear locker forcing.
Alarm in case of cab's and/or van's door forcing.
Volumetric sensors alarm with activated burglar device.
á á
33