Adjusting The Brightness (Bright) - Canon VC-C50i Mode D'emploi

Controlling the Camera from the Wireless Controller
BRIGHT ZOOM
HOME
SET/OK CANCEL
1 2
AF
4 5
MF
∞
7 8
0
ON SCREEN Fn ID MENU
Adjusting the Brightness
This function brightens or darkens the image. When the camera is switched on, the brightness
is set to the Normal level.
BRIGHT ZOOM
HOME
SET/OK CANCEL
1 2
AF
4 5
MF
∞
7 8
0
ON SCREEN Fn ID MENU
24
To fix the focus
Press the n button.
■ This switches auto-focus off and fixes the focus.
T
W
To focus on nearby subjects
Press the r button.
■ This enables switching the camera to manual focus mode
3
while moving the focal point closer to the camera.
6
■ Holding the button down moves the focal point closer to the
9
camera.
To focus on distant subjects
Press the e button.
■ This enables switching the camera to manual focus mode
while moving the focal point further from the camera.
■ Holding the button down moves the focal point further away
from the camera.
■ At some zoom settings, the camera may not be able to focus
on the subject (→ P.22).
To brighten or darken the image
Press the z side of the button to brighten the image and
the x side to darken the image.
T
■ The image gradually brightens (or darkens) while the button
W
is held down.
3
6
9 ■ The Normal brightness setting corresponds to setting [5] in
the AE REFERENCE screen (→ P.32). The brightest setting
is [10] and the darkest setting is [1].
■ In particularly dark locations, it may not be possible to adjust
the brightness.
(BRIGHT)
Darker Normal brightness Brighter