Alesis RECITAL PRO Guide D'utilisation page 7

Voice Volume
To set the volume for each voice in Layer and Split Modes:
1. Press the Function button to enter Function Mode, then turn the Value Dial to select
Upper Volume or Lower Volume (for the voices in Layer Mode), or Split Volume (for the
split voice in Split Mode).
2. Press the Function button again to enter the corresponding menu. The parameter will
flash, indicating it is editable.
3. Turn the Value Dial to set the volume of the selected Voice from 000–127.
4. After 7 seconds of inactivity, the Display will return to the main screen.
Touch Sensitivity
The Recital Pro digital piano is equipped with touch response to control the level of the voice
with your playing strength—just like on an acoustic piano. That means the harder you play the
keys, the greater volume comes from the speakers. Turning this function off results in a fixed
touch response no matter how hard or how soft you play the keys.
To set the touch sensitivity:
1. Press the Function button to enter Function Mode, then turn the Value Dial to select
Touch.
2. Press the Function button again to enter the corresponding edit menu. The parameter will
flash, indicating it is editable.
3. Turn the Value Dial to select the desired touch level:
•
Off: Fixed velocity
•
1: Soft
•
2: Medium
•
3: Hard
4. After 7 seconds of inactivity, the Display will return to the main screen.
Transpose
This function enables the overall pitch of the piano to be transposed up or down by a
maximum of one octave in semitone increments.
To change the transposition:
1. Press the Transpose button to enter the corresponding edit menu. The parameter will
flash, indicating it is editable.
2. Turn the Value Dial to set the transposition value.
3. After 7 seconds of inactivity, the Display will return to the main screen.
7