auna ULTRASONIC CD Mode D'emploi page 31

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

track at high speed until desired point passage, and then release the button.
Playback will start again from this point.
To select a song which track number exceeds 10 (for MP3 disc only)
press the 10/M/FOLD.- or 10/M/FOLD.+ button.
To Select A Desired Folder for MP3 disc that contains more than one folder:
To select a desired folder during playback, press and hold the 10/M/FOLD.-
or 10/M/FOLD.+ button
Programming tracks
Programming tracks of disc are possible when playback is stopped. Up
to 20 tracks for CD disc and 99 tracks for MP3 disc can be stored in the
memory in any order.
1. In stop mode, press the PROG./P-MODE button to enter program
setting, the PROG logo will flash on the display and show P01.
2. Press the ⏭ or ⏮ button to select the first desired track to be
programmed.
3. Press the PROG./P-MODE button to enter. The display would flash PORG
and show P02.
4. Repeat steps 2 & 3 to store other desired tracks until all tracks are
programmed.
5. Press the /PAIR/SCAN button to start playback from the first
programmed track.
6. Press the STOP button to stop program playback. To clear the program,
you may press the STOP button when the disc stopped and open the CD
Door, program will be erased.
Repeat play
You can play one track or all tracks on the disc repeatedly.
To Repeat a Single Track
1. Press PROG./P-MODE button on unit during play, the display will show
"⮎" and the current track will be played over and over again.
2. To cancel repeat play, press PROG./P-MODE button on unit until "⮎ "
disappears from the display.
To repeat all the Tracks
1. Press PROG./P-MODE button on unit until the " ⮎ ALL " shows steadily
on the display, all tracks on the USB will be played over and over again.
2. To cancel repeat play, press the PROG./P-MODE button on unit until
"⮎ ALL " disappears from the display.
EN
31

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

10035208

Table des Matières