Table des Matières
Publicité
tomatically turns off after 30 seconds. If left unattended on the heel it automatically turns off after 8 minutes. To
turn it on again, move the iron. A short beep can be heard before the iron is switched off by itself. To reactivate
the iron, move it shortly and it is back to working mode.
10
To switch-off the steam iron, press the selected setting for two seconds, a short beep can be heard and all lights
will turn off. Disconnect the mains plug. Never pull the supply cord. Instead, grasp the plug and pull.
Empty the water tank and let the iron cool completely before storage.
11
Always store the iron on its heel with the cord twisted loosley around the cable wrap facility. To clean exterior
surfaces, use damp soft cloth and wipe dry. Do not use any chemical solvents, as they may damage the surface.
CLEANING (DO NOT USE ANY DETERGENT)
12
Flush Clean (K). When reminder (F) flashes, fill the tank with water to max level (M) and select "Linen" programme.
When headlight flashes, unplug the iron. Hold the iron over a sink, press theFlush Clean button (K). Use a full tank of
water. Release button to stop Flush Clean function. Repeat the procedure if necessary.
NOTE: DO NOT USE ANY DESCALING FLUID, VINEGAR OR CITRUS ACID!
13
Press the reminder for Flush Clean, Renew Filter (F) for 2 seconds and a short beep will be heard, after per-
forming the 2 steps needed. Then the reminder light will switch off. Soft Water Activator (L) is recommended
right after Flush Clean. Open water filling cover (P) and pull the Soft Water Activator (L) out for disposal. Replace
with new Water Softener System Electrolux EDC03/900923064. Both Flush Clean & Water Softener System in
combination ensure a clean, soft steam for best ironing results and longer lifetime of your steam iron.
14
Cleaning the soleplate (N). To remove burnt residues, iron over a damp cloth while the iron is still hot.
To keep the soleplate smooth, avoid contact with metal objects. Never use scouring pads or harsh cleaners as
they may damage the surface.
HOT SOLEPLATE INDICATOR (A)
15
Your appliance is equipped with hot soleplate indicator ThermoSafe™ which detects when the soleplate is hot
by changing its colour from black to red.
the sticker didn't turn red. Once the temperature of the soleplate is < 40°C, the colour changes back to black
showing the iron is ready to be stored away.
16
Turn off headlight by pressing both linen and outdoor for 1 sec.
17
Turn off sound by pressing both wool and cotton for 1 sec.
Enjoy your new Electrolux product!
SAFETY ADVICE
Read the following instruction carefully before using machine for the first time.
• This appliance can be used by children aged from 8 years and above and persons
with reduced physical, sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or instruction concerning use of
the appliance in a safe way and understand the hazards involved.
• Children shall not play with the appliance.
• Cleaning and user maintenance shall not be made by children without
supervision.
• Keep the iron and its cord out of reach of children less than 8 years of age when it
is energized or cooling down.
• The surfaces are liable to get hot during use .
• This product is appropriate for use with tap water. It is recommended to use
www.electrolux.com
Note!
During heat-up time, the soleplate might be hot even though
GB
FR
AR
BG
CZ
DE
DK
EE
ES
FA
FI
HR
HU
IT
LT
LV
NO
PL
RO
RU
SE
SI
SK
SR
TR
UA
7
Publicité
Table des Matières
