LENCO PDR-031 Mode D'emploi page 10

DAB Mode- Prune Invalid
This function will remove unavailable stations from the station list. Press the Menu button. Use the
Select knob to navigate to the "Prune Invalid" option and press the Select knob to confirm.
Rotate the Select knob to select (yes) to proceed to prune the invalid/unavailable stations. If (No) is
selected the operation will be cancelled.
DAB Mode- DRC
DRC is dynamic range compression, and it is about increasing the loudness of the quieter parts of
the audio signal, and decreasing the loudness of the louder parts.
In DAB mode, press the Menu button, then use the Select knob to navigate until "DRC" is
highlighted. Press the Select knob to confirm.
Now use the Select knob to cycle through off, high, low level. Press the Select knob button to
confirm your choice
DAB Mode- display mode
This function will display various information about the current station.
Press the Select knob repeatedly to scroll through the following information:
DLS (dynamic label segment)/Radio text- The Radio station may include a scrolling message about
the current program.
Ensemble/Multiplex (Group name): The ensemble/multiplex is a group of stations that are bundled
and transmitted together in one single frequency. There are national and local multiplexes, local
ones contain stations that are specific to the local area.
Frequency: The display will show the frequency of the station being broadcast.
Signal strength: The display will show a slide bar to indicate the strength of the signal. The stronger
the signal, the longer the bar.
Signal error: This is displayed as number between 0-99. It would not be possible to satisfactorily
listen to a radio station with a signal error rate of 30 or above.
Audio bit rate: The display will show the digital audio bit rate being received.
Time and date: the time and date will be automatically updated by the radio.
10