Control Panel; Power Led; Error Led; Batt. Led - Seiko Epson TM-P60 Manuel D'utilisation

Control Panel (LEDs and Switches)
See illustration

POWER LED

Meaning
On Power is on.
Off Power is off.
Flashing The printer is in power-off operation or is in an area where wireless communication is
not possible.
Printer ERROR
Condition LED
Power On On
Off
Flashing
Power Off, On
battery
installed, and
Off
AC adapter
connected
Printer BATT.
Condition LED
Power On and On
battery
Off
installed
Flashing
Power Off and On
battery
Off
installed
Buttons
POWER
Press the button to turn the power on or off. To turn off the power, you need to
hold the button for more than 2 seconds.
FEED
Press the button to feed paper.

Supplying Power

You can supply power through the battery pack packaged with the printer or the
AC adapter PS-10 (Model: DA-42Y12). See illustration
WARNING:
Be sure to use the battery LIP-2500 that came with the printer. Using a battery
other than the one specified may cause fire, explosion, leakage, overheating
or other damage.
B
.
Meaning
Printer is offline (paper out, power-on initialization, roll paper cover open,
power-off operation, or when the battery is used to supply the power,
the remaining battery charge is not enough for printer operation).
Printer is online.
The temperature of the printer is too high. The printer resumes printing
automatically when the temperature returns to normal.
Indicates that an abnormality occurred during battery charging. The
battery must be replaced with a new one.
Battery is being charged. (BATT. [battery] LED is on.)
Meaning
Remaining battery charge is not enough. It must be fully charged.
Remaining battery charge is adequate.
Remaining battery charge is below half.
The battery is being charged.
The battery is fully charged.
C
.
TM-P60 User's Manual (IEEE802.11b) 7
English