Connecting The Base Station - REMEHA iBase RF Guide D'utilisation

3.2 Connecting the Base station

1
2
afb. 02 Opening housing
T001082-D
T001082
afb. 03 Front and base plate
T001083
1. Open the housing by releasing the front
2. Attach the base plate of the Base
T001083-B
of the housing from the base plate using a
screwdriver; see afb. 01.
station to the wall using the supplied
screws and plugs; see afb. 02. (Keep
some space free above the Base station
to allow for opening the housing again
later).
EN
24