Seg Sydney 80TCF Mode D'emploi page 41

80cm (31.5") LED BLU-TV Sydney 80TCF
Connections
Headphone out: Connect it to your headphone or other audio equipment.
Common Interface: CI slot.
USING YOUR COMMON INTERFACE SLOT Common Interface
The Common Interface (CI) slot is designed to accept the Conditional
Access Module (CAM) and Smart Card in order to view the pay TV
programmes and additional services. Contact your Pay Per View TV service
provider to get more information about the modules and subscriptions.
NOTE: Conditional Access Module and Smart Cards are sold separately.
WARNING! SWITCH OFF YOUR TV BEFORE ANY MODULE IS
INSERTED INTO THE COMMON INTERFACE SLOT, THEN ADD THE
SMART CARD TO THE CAM.
USB: USB jack.
Coax: Digital coaxial output.
RF: Connect antenna or cable 75 Ohm coaxial to receive TV signal.
Video: Connect to the video output of external devices.
(AUDIO)L/R IN: Audio signal input for AV(Shared with YPbPr).
YPbPr: Connect them to the YPbPr video output terminal of DVD.(used in
component source)
HDMI1 HDMI2
AC POWER IN: Connect to power supply.
HDMI1/2/3: Connect it to the HDMI of DVD or other equipment.
VGA: For PC display.Connect it to the D-Sub 15 pins analog output connector of the PC.
PC-IN: Connect it to the audio output terminal of PC.
SCART: Connect them to the SCART video output terminal of DVD.
HDMI3
SCART
6