Honest S1M-BL-115M Manuel D'utilisation page 7

MAIN SAFETY INSTRUCTIONS FOR POWER TOOLS
WHEN USING A POWER TOOL, THE FOLLOWING BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE TAKEN TO
REDUCE THE RISK OF ELECTRIC SHOCK, OF FIRE AND / OR PERSONAL INJURY. READ AND UNDERSTAND THE
USER'S MANUAL BEFORE OPERATING THE POWER TOOL IS REQUIRED.
BASIC ELECTRICAL SAFETY
DOUBLE INSULATION.
INSULATED FROM THE MAIN POWER SUPPLY MAKING
IT UNNECESSARY FOR THIS POWER TOOL TO BE
EARTHED.
OUTLET VOLTAGE AND POWER TOOL VOLTAGE
COMPATIBILITY. MAKE SURE THAT THE OUTLET
VOLTAGE IS WITHIN THE VOLTAGE RANGE OF THE
POWER TOOL.
AVOID ELECTRICAL SHOCK. DO NOT WORK IN WET
AND HUMIDE CONDITIONS WITH A POWER TOOL.
BASIC PERSONAL SAFETY
BE WATCHFUL. OPERATING
REQUIRES ATTENTION,
CONTROL TO AVOID ANY PERSONAL INJURY. THUS,
WHILE USING A POWER TOOL YOU MUST NOT BE
TIRED AND/OR UNDER THE INFLUENCE OF ALCOHOL,
DRUGS OR MEDICATION.
USE SAFETY EQUIPMENT.
SAFETY EQUIPMENT SUCH AS GOGGLES, DUST MASK,
NON-SKID SAFETY SHOES,
PROTECTION WHENEVER
APPLICABLE.
DRESS PROPERLY. DO NOT WEAR LOOSE CLOTHING
OR JEWELRY SUCK AS NECKLACE THAT CAN BE
CAUGHT BY THE POWER TOOL MOVING PARTS.
Ref: 647059; 647060
THIS TOOL IS DOUBLE
A POWER TOOL
CONCENTRATION AND
USE APPROPRIATE
OR HEARING
AND WHEREVER
REMOVE ANY ADJUSTING TOOL SUCH AS KEY OR
WRENCH. BEFORE PLUGGING IN THE POWER TOOL,
REMOVE ANY ADJUSTING TOOL TO AVOID ACCIDENT
CAUSED BY THE ROTATION OF THE ADJUSTING
TOOLS LEFT ATTACHED TO A ROTATION PART.
AVOID ACCIDENTAL START.
SWITCH IS IN THE "OFF" POSITION BEFORE PLUGING
IN THE POWER TOOL.
AVOID ELECTRICAL SHOCK. ALWAYS HOLD POWER
TOOL BY INSULATED GRIPPING SURFACES, WHEN
PERFORMING AN OPERATION WHERE THE DRILLING
OR CUTTING TOOLS
ELECTRICAL WIRES.
MAINTAIN THE POWER TOOL AND YOUR HAND
CLEAN. KEEP POWER TOOL, NOTABLY THE HANDLE(S)
AND YOUR HANDS CLEAN AND FREE FROM OIL AND
GREASE TO ENSURE BETTER CONTROL OF THE
POWER TOOL IN OPERATION.
KEEP CHILDREN AND UNTRAINED PEOPLE AWAY.
POWER TOOL USE AND CARE
DO NOT FORCE THE POWER TOOL. DO NOT USE THE
POWER TOOL IN AN INAPPROPRIATE CONTEXT OR IN
A CONTEXT THE POWER TOOL IS NOT DESIGNED FOR.
EACH POWER TOOL IS DESIGNED FOR SPECIFIC
PERFORMANCE. A POWER TOOL DESIGNED TO BE
SERVED AS A DO-IT-YOURSELF TOOL SHOULD NOT
BE USED BY PROFESSIONALS FOR EXTENDED USES.
7
ENSURE THAT THE
MAY CONTACT HIDDEN