Honest S1M-BL-115M Manuel D'utilisation page 10

YOUR ANGLE GRINDER POSSESSES SOME OR ALL OF THE FOLLOWING FUNCTIONS:
FIGURE 1 : ANGLE GRINDER MAIN FUNCTIONS
1. "ON/OFF" SWITCH
2. LOCK-ON SWITCH
3. SPINDLE LOCK
4. WHEEL
THE DRAWINGS BELOW INTEND TO MAKE YOU FAMILAR WITH DIFFERENT FUNCTIONS OF YOUR ANGLE GRINDER.
THESE PICTURES MAY NOT SHOW THE ACTUAL ANGLE GRINDER MODEL THAT YOU HAVE PURCHASED. BEFORE
ANY INTERVENTION, YOUR ANGLE GRINDER MUST BE UNPLUGED FROM THE POWER SOURCE.
FIGURE 2 ET 3: FIXING THE WHEEL GUARD AND
INSTALLING A WHEEL OR A DISC
INSTALL THE WHEEL GUARD. DEPRESS THE SPINDLE
LOCK. POSITION THE WHEEL GUARD ON THE
SPINDLE NECK TO ALIGN THE TWO BUMPS ON THE
GUARD WITH THE TWO NOTCHES ON THE SPINDLE
NECK. TURN THE GUARD
APPROPRIATELY TO PROTECT THE USER.
INSTALL A GRINDING WHEEL OR A CUTTING DISC.
THREAD THE LOCK NUT ONTO THE SPINDLE WITH A
Ref: 647059; 647060
ANGLE GRINDER MAIN FUNCTIONS
ANGLE GRINDER IN OPERATION
TO POSITION IT
5. MOUNTING FLANGE
6. SIDE HANDLE
7. WHEEL GUARD
SPANNER PROVIDED (FIGURE 2). PLACE THE WHEEL
ON THE SPINDLE. THREAD ON THE LOCK NUT AND
TIGHTEN IT USING THE SPANNER, WHILE HOLDING
THE SPINDLE LOCK IN (FIGURE 3).
10