Siemens SINUMERIK 840D sl Manuel De Mise En Service page 119

Active M-Codes:
--- 04.10.2006 09:24:57 HMI-Emb 0 CH_STATE_CHANGED
Channel State of Channel 1 changed to active
--- 04.10.2006 09:24:57 HMI-Emb 0 OPEN_WINDOW
Window opened: "Machine configuration" (Id 13392, Appl. 6)
--- 04.10.2006 09:24:57 HMI-Emb 0 CLOSE_WINDOW
Window closed: "Dummy-Window" (Id 20005, Appl. 1)
--- 04.10.2006 09:24:57 HMI-Emb 0 CLOSE_WINDOW
Window closed: "Position - Work" (Id 20040, Appl. 1)
--- 04.10.2006 09:24:57 HMI-Emb 0 CLOSE_WINDOW
Window closed: "Transformation/G functions" (Id 20220, Appl. 1)
--- 04.10.2006 09:24:57 HMI-Emb 0 CLOSE_WINDOW
Window closed: "Feedrate" (Id 20280, Appl. 1)
--- 04.10.2006 09:24:56 HMI-Emb 0 CLOSE_WINDOW
Window closed: "Tool" (Id 20300, Appl. 1)
--- 04.10.2006 09:24:56 HMI-Emb 0 CLOSE_WINDOW
Window closed: "Actual block" (Id 20190, Appl. 1)
--- 04.10.2006 09:24:56 HMI-Emb 0 CLOSE_WINDOW
Window closed: "Dummy-Window" (Id 21010, Appl. 1)
--- 04.10.2006 09:24:56 HMI-Emb 0 CLOSE_WINDOW
Window closed: "Dummy-Window" (Id 1000, Appl. 1)
--- 04.10.2006 09:24:56 HMI-Emb 0 KEY_PRESSED
Key pressed: KEY_F6 (RELEASED) (e0/40)
--- 04.10.2006 09:24:56 HMI-Emb 0 KEY_PRESSED
Key pressed: KEY_F6 ( 0/40)
--- 04.10.2006 09:24:53 <default> 0 ALARM_QUIT
Alarm quit: 100014
--- 04.10.2006 09:24:53 HMI-Emb 0 OPEN_WINDOW
Window opened: "Dummy-Window" (Id 1000, Appl. 1)
--- 04.10.2006 09:24:53 HMI-Emb 0 CLOSE_WINDOW
Window closed: "Notebooks screen" (Id 5421, Appl. 1)
--- 04.10.2006 09:24:53 HMI-Emb 0 KEY_PRESSED
Key pressed: KEY_SELECT_MODE ( 0/44)
--- 04.10.2006 09:24:51 <default> 0 ALARM
NCK-Alarm: 8080, cleartype Alarm-Cancel
7 option(s) is/are activated without setting the license key
--- 04.10.2006 09:24:50 HMI-Emb 0 KEY_PRESSED
Key pressed: KEY_F5 (RELEASED) (e0/3f)
Mise en service HMI Embedded (IM2)
Manuel de mise en service, 01/2008, 6FC5397-8CP10-1DA0
Diagnostic et maintenance
8.3 Enregistreur d'événements
119