Fitting The Panel And Fixing The Hood Canopy - Panasonic KH-AX95XB Mode D'emploi Et Instructions D'installation

Installing the Appliance
Island
12f
12e
12c
24
EN

Fitting the Panel and Fixing the Hood Canopy

Before fixing the hood canopy to the frame:
■ Remove the grease filters from the hood canopy;
■ Remove any charcoal filters.
■ Working from below, fix the hood canopy to the
■ Insert the rubber supports to the upper and lower
■ Slide the lower part of the panel to the base of the
7.4
NOTE
Make sure that the power cable has been properly inserted into the
control board unit socket located on the side of the fan.
frame provided, using the 4 screws (Ref. 12f)
provided.
part of the panel (Ref. 3) as shown.
chimney ensuring the metal tabs are secure.