König Electronic CMP-UPS650VAL Mode D'emploi page 3

Connecting and charging the UPS
Plug in the AC input cord to a wall outlet. For the best result, charge the battery for at least 6 hours before
initial use. The UPS charges its battery while connected to the utility.
Connecting the loads
Plug in the loads to the output sockets at the rear of the UPS. Simply turn on the power switch of the UPS.
The devices connected to the UPS will be protected by the UPS unit.
Connect communication cable (only for the model with USB port)
To allow unattended UPS shutdown/start-up and status monitoring, connect the USB cable to the UPS unit
and the other end into a free USB port in your computer. With the monitoring software installed, you can
manage the UPS and see the status on your computer screen.
Turn the UPS unit on/off
Turn the UPS on/off by pressing the power switch.
Software download & installation
- To be sure you have the most recent software version, download it from
http://www.power-software-download.com
- Click ViewPower software icon and then choose your required OS to download the software
- Follow the on-screen instructions to install the software
- When your computer restarts, the monitoring software will appear as an orange plug icon located in the
system tray, near the clock
- User name and password in software management:
User name: administrator
Password: administrator
6 months warranty on battery
Safety precautions:
Maintenance:
Clean only with a dry cloth. Do not use cleaning solvents or abrasives.
Warranty:
No guarantee or liability can be accepted for any changes and modifications of the product or damage caused
due to incorrect use of this product.
General:
Designs and specifications are subject to change without notice.
All logos brands and product names are trademarks or registered trademarks of their respective holders and
are hereby recognized as such.
Keep this manual and packaging for future reference.
Attention:
This product is marked with this symbol. It means that used electrical and electronic products should
not be mixed with general household waste. There is a separate collections system for these products.
To reduce risk of electric shock, this product should ONLY be
opened by an authorized technician when service is required.
Disconnect the product from mains and other equipment if a
problem should occur. Do not expose the product to water or
moisture.
3