ERRECOM EASY FLUSH Manuel D'utilisation page 11

Connect the fittings supplied in the kit according to the type of system to be flushed. Tighten the connections in a suitable
manner to avoid any fluid leakage during the flushing operation. Divide into sectors the various parts of the system to
make the flushing operation more effective. To run this operation open/close the various valves of each branch of the
system; if necessary, use EASY-PASS (Art-Nr.RK1343 not included).
See the following scheme.
A B
A
B
Reproduction, even partial, in any form of this handbook without prior written consent by ERRECOM srl is strictly prohibited.
ERRECOM srl reserves the right to improve or modify its equipments at any time and without prior notice.
CONNECTION TO AN hVAC SySTEM
ENGLISH
IST.VP1027.01