Richen EF172D Instructions D'utilisation page 44

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 70
E N
S E T TI N G YO U R TA RG E T TE M PE R AT U R E
Press the '+' or '-' button to increase or decrease the temperature based on
the temperature setting you want.
ECO means 2 °C lower than your desired temperature setting.
ECO – means 4 °C lower.
COMF+ means 2 °C higher.
COMF++ means 4 °C higher.
To check your daily timer settings, press
off, you need to return to normal mode to switch it off.
TI M E R FO R W E E K LY H E ATI N G
There are preset heating times that can be altered if desired.
From Monday to Friday 6:00 a.m. to 8:30 a.m., 5:00 p.m. to 10 p.m.
From Saturday to Sunday: 6:30 a.m. to 9:30 a.m, 11:00 a.m. to 1:00 p.m.,
5:00 p.m. to 10:00 p.m
Press M until
is displayed in the upper right corner of the screen and then
enter the weekly timer heating mode. Press
seconds to activate the weekly timer.
Press
or
Press the
current setting (the symbol is highlighted) or to cancel (the symbol is
displayed normally). Several days can be selected together.
Press the
period. Press
desired time.
Maximum three heating periods per day
Each time the button is pressed, the number of minutes is increased /
decreased by 15 minutes.
Press the
return to the weekly over view.
Press and hold the button for three seconds or wait 10 seconds to save
and exit the heating time setting. To check your weekly timer settings,
press the
return to normal control mode to switch it off.
44
to move the cursor (flashing under- underline)
button in the corresponding weekly position to select the
button to move the cursor to the setting area for the time
or
to select hours or minutes. Press '+' or '-' to the
button to set the heating times for the selected day(s) and
and
button. If the heater is to be switched off, you must
. If the heater needs to be switched
and hold the button for six

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

 ef173dEf174dEf175d

Table des Matières