Table des Matières
Publicité
6 INFORMATIONS AVANCÉES DE PARAMÈTRAGE
6.1 Calibration d'un Pad
Pad thresholds are calibrated at the factory, so you shouldn't encounter an overly
sensitive pad. These settings are not user-editable.
On the other hand, the full range of the pad is not set, and should you wish to alter that
somewhat, you may use the pad calibration page:
Here you can alter the pad velocity gain. Each of the 8 hardware pads has a dedicated
setting.
Please be cautious with low values, as they could have some negative side effects.
OK
Apply
Default
Close window
These settings are stored into a non volatile memory inside keyboard (very much the
way presets are).
ARTURIA – MiniLab – MANUEL D'UTILISATION
Apply all changes and close this dialog window.
Apply all changes but keep this dialog window open.
Set all sliders to the center position.
Don't commit changes to keyboard.
37
Publicité
Table des Matières
