Place The Safety Pod; Spray Cleaning Solution; Start - ECOVACS ROBOTICS WINBOT7 Mode D'emploi

3.5 Place the Safety Pod

The Safety Pod MUST be placed on the inside
of the window.
Press the Safety Pod FIRMLY on the inside of the
window being cleaned. Make sure the Safety Pod is
attached securely in place.

3.6 Spray Cleaning Solution

WINBOT 7 should only be used with WINBOT Cleaning Solution. Using other cleaners significantly
*
reduces WINBOT's performance and can damage the robot.
Spray the Front Cleaning Pad with the provided
WINBOT Cleaning Solution 3 times. The Front
Cleaning Pad should be damp, not wet.

3.7 Start

1
Plug in WINBOT 7
3. Operating the Robot
After spraying, wipe the bottom of WINBOT 7
with the provided Finishing Cloth.
9 9
EN