Footsw: Foot Switch Pedal Settings - Korg Pandora PX5D Manuel D'utilisation

FOOTSW: Foot switch pedal settings

Use the Value encoder to specify the function of the foot
switches connected to the PX5D.
PG: The pedals will switch between the programs as-
signed to the PROGRAM MEMORY [A]–[D] buttons.
The pedal connected to the UP connector (red) of the in-
cluded cable for FOOT SW jack will step upward through
the programs in the order of [A]→[B]→[C]→[D]→[A]→...
The pedal connected to the DOWN connector (white) will
step downward through the programs in the order of
[D]→[C]→[B]→[A]→[D]→...
Ud: The pedals will switch between programs U00–P99.
The pedal connected to the UP connector (red) of the in-
cluded cable for FOOT SW jack will step upward through
the programs in the order of U00→ ... →U99→P00→......
→P99→U00→... The pedal connected to the DOWN con-
nector (white) will step downward through the programs
in the order of U00→P99→ ... →P00→U99→
...→U00→P99→...
34
Switch pedal
function
SS: The foot switches will start/stop recording and play-
back for Phrase Trainer mode. The foot switch connect-
ed to the UP connector (red) of the included cable for
FOOT SW jack will start/stop recording. The foot switch
connected to the DOWN connector (white) of the cable
will start/stop playback.
With this setting, the foot switches will operate only
when you're in Phrase Trainer mode.
If you've assigned the foot switch to "PG" or "Ud," you
can activate the Bypass function by simultaneously press-
ing both foot switches connected to the two jacks, or acti-
vate the Mute function by holding down both switches
for one second or longer.