LEXIBOOK DVDP6 Série Mode D'emploi page 27

Masquer les pouces Voir aussi pour DVDP6 Série:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 1
PASSWORD MODE
Set password mode ON/OFF. If set to off, change parental level will not check password.
OLD PASSWORD
Enter the OLD password (initial password is 1369), and the cursor will jump automatically
to NEW PASSWORD.
NEW PASSWORD
Enter the NEW password. Enter 4 digits from the remote control unit numeric buttons, and
the cursor will automatically jump to CONFIRM PASSWORD.
CONFIRM PASSWORD
Confirm the NEW password by entering it again. If the confirmation is incorrect, the cursor
will stay in this column. After entering, the correct new password again, the cursor will
jump automatically to OK.
NOTE: If the password has been changed, the parental and disc lock code will also be
changed. The default password (1369) is always active even the password has been
changed.
Picture CD
1. Load a picture CD into the tray. Use the direction keys to select 'JPEG' and press
ENTER key to confirm.
2. Use the
/
keys to select a folder, then press the ENTER key to start browsing
through the files.
3. Use the
/
keys to select a photo, then press the ENTER key to launch a slide show
of the pictures.
4. Press
to pause and / or resume the slide show.
5. Press
/
on the remote control to skip to the next picture or return to the previous
picture.
6. Use the direction keys to flip or rotate the pictures.
7. To view the thumbnail list of photos stored on the CD, press the
show. Use the direction keys to navigate through the photos and options at the bottom.
Note: During the slide show:
• The numeric keys can also be used to directly input the number corresponding to a
photo. For numbers over 10 i.e. 12, press the 10+ key and then the number 2.
You can press the
• Press the ZOOM key to enlarge or shrink the image. Then press one of the direction
keys right after having pressed ZOOM to direct the enlarged or shrunk spot to another
area. To go back to the slide show, press the
1. Insert the USB into the USB socket.
2. Press the SOURCE key and then use direction keys to select between DVD or USB.
3. Press the ENTER key to confirm your selection.
4. Use the direction keys to select 'Audio', 'JPEG', 'Video' and press ENTER key to
confirm.
5. If the player automatically starts playing the Video, Audio or Picture files, press the
STOP
key to view the file menu and select the files you wish to play.
6. For all other functions refer to the instructions earlier in this manual for playing DVD,
Audio or picture files.
DVDP6seriesIM2120_339_V25.indd 27
Password Setup Page
Picture CD
key at any time to go back to the list of pictures.
USB
key during slide
/
.
27
18/3/2020 11:12 AM

Publicité

Table des Matières
loading

Table des Matières