Components, Equipment - flamco Flamcomat Flexcon M-K -Fill P Installation Et Mode D'emploi

2.4

Components, equipment

1. Non-return valve
2. Water meter with pulse output (IWZ/pwm)
3. Float valve for filling with system separation
4. Break tank
5. Cover for housing access to the break tank
6. Break tank overflow connection
7. H ousing (only edges portrayed; earth connection
marked with a label on the front side)
8. Pressure switch for the pump's dry run protection
9. Pump
10. Pressure hose – connection to the system
11. Terminal box with connection contacts to the top hat rail
(and transparent cover)
12. Feet as optional equipment
13. Threaded connections for Pos. 12
10
4
11
18
17
System
10
15
9
13
12
5 3
14. Removable housing side panel
(only edges portrayed)
15. N on-return valve (prevents reverse flow out of the system
into the break tank).
16. External protective earth (PE) conductor connection
17. Terminal block for connecting the pressure switch
and for the electrical connection to the SPC (to be provided
by the customer)
18. Terminal block for connecting the pulse water meter
and for electrical connection to the SPC (to be provided by
the customer)
19. Terminal block for connecting the pump
and for electrical connection to the SPC (to be provided by
the customer)
Feed
6
19
2 1
8
14
7
16