Setting A Password On The El-Skyport Wifi; Li-Ion Battery - Elinchrom EL-Skyport RX WiFi Manuel D'utilisation

WHICH SOFTWARE AND HARDWARE DO YOU REQUIRE
TO CONTROL AND REMOTE EL-FLASH UNITS FROM THE
IPHONE ...
™
1. Download and install the EL-Skyport RX WiFi Mobile App from the Apple
of charge). Alternatively follow the link:
http://bc.gs/12
2. The EL-Skyport RX WiFi module is required.
3. Any Elinchrom RX flash unit, such as Digital RX 1200 / 2400 power packs, Style RX 300 / 600 / 1200 compacts, Ranger
RX / RX SPEED / RX SPEED AS battery power packs with the optional plug-in EL-Skyport RX Tranceiver or the Ranger
RX Quadra AS battery power pack with built-in EL-Skyport RX receiver.
4. More units will be released with the time to offer this remote option, please visit frequently www.elinchrom.com to find
actual information.

SETTING A PASSWORD ON THE EL-SKYPORT WIFI

The EL-Skyport WiFi network can be protected using a password in order to prevent unauthorized devices to make changes on
the settings of your flash units. The password will be stored in the EL-Skyport application after the setup, and won't be asked ever
again unless you try to access the module using another device or if you reinstall the application.
Setting a password: Go to the EL-Mobile App settings, type your password into the "Password" field and confirm with the "Done"
button. The EL-Skyport RX WiFi module will need to store the password and reconfigure itself, and won't be available for a few
seconds.
Removing the password: In the EL-Mobile App "Settings", empty the "Password" field and confirm with the "Done" button.

LI-ION BATTERY

Li-Ion battery with 900mAh, one charge lasts up to 10 hours.
Recharging time is approx. 3 hours with the EL-Skyport Universal charger.
Use only Elinchrom EL-Skyport Universal charger!
NOTE:
Charge the battery before using!
Recharge the battery at least once every 3 months!
Store for iPhone™, iPad™, iPod Touch™ (free
®
EN
7