Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Display Brightness
Date and Time
Firmware version (optional)
Bluetototh (optional): bluetooth settings (optional) allow you to establish a connection
and communicate via Bluetooth with other devices such as scales, printers, computers and
mobile devices. For full instructions on how to use the Bluetooth functionality, please refer
to the Application Note available on Datamars website www.datamars.com.
6
Troubleshooting
•
If the reader doesn't switch on, charge the battery for at least 30 minutes and then try to switch on the
reader again (recommended time for full battery recharge = 2 hours).
•
If the reader doesn't work properly or the reading distance is too short, you may be close to a source of
electromagnetic disturbances (monitors, PC...) or you may be close to metallic surfaces which reduce
the performance of the antenna.
•
In case of technical issues with the reader, an error message can be displayed on the screen. For more
information on the error displayed, please contact Livestock-id@datamars.com.
Publicité
Table des Matières
