Before You Start - Datamars LIVESTOCK ID TracKing-1 Guide De Démarrage Rapide

1

Before you start

This guide provides you the basic information to start using your TracKing-1 to read electronic identification
codes (EIDs). For additional information on the reader functionalities, please refer to Datamars website
www.datamars.com
We recommend to fully charge the battery before the first usage of the reader. To charge the battery, plug
the USB cable into the corresponding connector on the bottom of the reader and connect it to a PC or a wall
mount adapter with USB plug. Be sure to safely eject the reader from your PC before disconnect the USB
cable.
"ON"/Reading button
Press this button to turn the
reader ON and start reading
With the reader on, press
this button to select the
commands above it in the
action toolbar
Press and hold this button
to turn the reader off
2 Home menu
Active screen when the reader is switched on.
Battery level
Bluetooth icon (optional)
Supported USB interface
Continuous reading icon
Session file
Display
Sessions menu
Antenna
(on the back of the reader)
Softkeys
Press these two buttons to
select the commands above
them in the action toolbar
Mini USB communication port
Reading
Date and time
EIDs counter
Settings menu