IN HOUSE LED XY10NR2700 Manuel D'utilisation page 12

with the type plate.
Do not leave the mobile appliance unattended during operation as this could lead to accidents
• Only operate mobile appliances with stands on stable surfaces.
• Never look directly into the light during operation. This could lead to eye injuries.
• Never use the appliance with a damaged cable. Take it to a specialist to be exchanged.
• Only use components and add-ons that are recommended by the manufacturer and designed for that
purpose.
• Never store the appliance without supervision in the reach of children.
• Before plugging the appliance in always ensure that both the plug and your hands are dry.
• Remove the plug before it is cleaned or polished.
• Never pull or carry the appliance by the power cable and never lay the power cable over harp edges.
• Do not use abrasive cleansers or pads for cleaning.
• Never submerge the appliance in water.
6. INITIAL OPERATION/FAULTS AND RESOLUTION
• After unpacking check that the appliance is complete and for any transport damage.
If in doubt do not use the appliance but rather contact your retailer.
• The appliance is supplied in stable packaging for protection.
- Remove the appliance from the packaging carefully.
- Remove all the packaging from the appliance.
- Clean the appliance and all accessory parts of packaging residue.
• Unwind the power cable completely.
• Mount the appliance at a suitable location on the pre-attached mounting bracket.
• Or mount the appliance on a carrying bracket or stand that is recommended by the manufacturer and
suitable for this
purpose. Please ensure that the carrying bracket or stand is standing on a stable, secure surface.
• Adjust the appliance to the direction that is to be lit.
• Make sure that the power cable length is suffi cient in order to supply power to the appliance.
• Insert the power plug into a suitable, earthed socket and do not look directly into the lamp.
7. FAULTS AND RESOLUTION
• If the LED floodlight doesn't work:
– Check that the power cable is plugged in correctly.
– Test the socket by plugging in a different appliance.
• If the socket is not working
– Check fuses.
– Check the power cable and socket for damage. Discontinue use of the appliance if damage is found.
Distribué par / Distribuito da / Distributed by / Vertrieben von NETELEC SRL FR - rue Philemon Laugier - 83400 Hyeres les Palmiers