Wurth Master AKP 310-C Power Notice Originale page 9

Akkuauspress - GB Seite 9 Donnerstag, 5. März 2009 2:03 14
GB
Read all safety warnings and all
instructions. Failure to follow the
warnings and instructions may result in electric
shock, fire and/or serious injury.
Save all safety warnings and instructions for future
reference.
Working safely with this machine is
possible only when the operating and
safety information are read completely
and the instructions contained therein
are strictly followed. In addition, the
general safety instructions in the
enclosed booklet must be followed.
Observe the warnings and working
instructions of the manufacturer on the
sealant cartridge.
The machine must not be damp and
must also not be operated in damp sur-
roundings.
Protect the battery charger from rain and
moisture. The penetration of water in a
battery charger increases the risk of elec-
tric shock.
Battery and Battery Charger
Under abusive conditions, liquid may be
ejected from the battery; avoid contact. If con-
tact accidentally occurs, flush with water. If
liquid contacts eyes, additionally seek medical
help. Liquid ejected from the battery may cause
irritation or burns.
Operating Controls
1 Application nozzle
2 Shutter-cap
3 Dispension tube
4 Push rod
5 Speed preselector
6 Battery unlocking button
7 Battery
8 Safety switch against starting
9 On/Off switch
10 Release lever
Not all of the accessories illustrated or described are included
as standard delivery.
For your Safety
Recharge only with the charger specified by
the manufacturer. A charger that is suitable for
one type of battery pack may create a risk of
fire when used with another battery pack.
Allow a heated battery to cool before charging.
Do not open the battery, and protect it from
impact. Store in a dry and frost-free place.
When battery pack is not in use, keep it away
from other metal objects like paper clips,
coins, keys, nails, screws, or other small metal
objects that can make a connection from one
terminal to another.
Shorting the battery terminals together may
cause burns or a fire.
Use only original Würth parts and accesso-
ries.
For further notes on safety refer to enclosed sheet.
The tool is intended to extrude 310 ml and 400 ml
single component sealant cartridges and sachets
and 600 ml sachets.
For damage caused by usage other then intended,
the user is responsible.
Protect the battery from heat and fire:
Danger of explosion! Do not place the
battery on radiators or expose to strong
sun rays for a longer time; temperatures
over 50 °C cause damage.
Intended Use
9