ARIETE 568 Mode D'emploi page 9

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 11
With its combination of professional and practical use, this blender is an irreplaceable kitchen aid:
- easy to use, thanks to the filler cap in the lid, which makes it possible to insert foods while the
blender is operating.
- ideal for instant recipe preparation.
- indispensable for excellent instant slush drinks.
DESCRIPTION OF THE APPLIANCE (Fig. 1)
A Filler cap
B Lid
C Lid releasing button
D Graduated goblet
E Blades
F Motor unit
G Operation dial (Pulse - 0 - I - II)
BLENDER USE INSTRUCTIONS
- Make sure the appliance is unplugged and the operation dial (G) is on position "0".
- Cut fruit and vegetable into small pieces and place them into the goblet (D) adding water or milk
in an amount, which does not exceed the MAX level indicated on the container.
- Position the lid (B) on the goblet and rotate it clockwise so that the apposite safety tab locks in
place into the apposite slot situated on the goblet (Fig. 2).
- Close the upper hole of the lid (B) by inserting the apposite cap (A) and rotating it clockwise (Fig. 3).
- Mount the goblet (D) on the motor unit (D) properly and rotate it counter-clockwise to align the
guides and the tabs (Fig. 4).
- Plug power cord into a socket.
- Start the appliance by turning the on dial (G) clockwise as far as the first (low speed) or the sec-
ond (high speed) notch to start the blades.
By rotating the dial (G) anti-clockwise, the PULSE function is enabled.
If the appliance should fail to start, make sure that the goblet is correctly fitted. The appliance
is fitted with devices to prevent it from operating if the goblet is not fitted or if it has been fitted
incorrectly.
- To stop the appliance, turn the on dial (G) back to «0».
- During use, it is possible to add foods into the goblet, by lifting out the filler cap (A) after having
switched off the appliance.
- It may be necessary to switch the appliance off several times in order to remove food residues
from container sides. In this case, switch off and unplug the appliance.
- Take the cap and the lid out and by means of the releasing button (C), Fig. 5, and the appropriate
spatula, remove any remaining food inside the container.
WARNING:
Place the foods for blending in the container and fit it to the power base before plugging the
appliance into the mains power.
Never remove the lid (B) during use.
- 7 -
EN

Publicité

Table des Matières
loading

Table des Matières