Controller" Programme; Drain" Programme - Pluggit AeroFresh Plus Manuel D'utilisation Et D'installation

5.2.3.

"Controller" programme

The following functions can be set in the CtrL programme:
• Switching on or off the internal humidity controller.
• Setting the humidity set points.
• Setting the parameters of the humidity controller (pro-
portional band and reset time).
1. Repeatedly press MODE button until the display shows
CtrL.
2. Press SET button. The internal humidity controller can
be switched on or off.
on --> switch on humidity controller
oF --> switch off humidity controller
3. Press SELECT button.
HuSP is displayed.
4. Press SET button. The humidity set points can now be
set.
o
Setting range: 10 -99
o
(alternating display HuSP and value)
It is set to 40 % as default.
5. Press SELECT button.
Pr is displayed.
6. Press SET button. You can now change the proportional
band.
Setting range: 5-15
(alternating display Pr and value)
It is set to 10 as default.
7. Press SELECT button.
Int is displayed.
8. Press SET button. You can now change the reset time.
Setting range: 0-100
(alternating display Int and value)
It is set to 0 as default.
9. Press SELECT button.
The CtrL programme restarts.
10. Press MODE button.
The CtrL programme is terminated.
o
o
5.2.4.

"Drain" programme

The following features can be set in the drA programme:
• Setting the drain volumen.
• Draining process under tension.
• Switching on or off regular draining of the steam cyl-
inder.
1. Repeatedly press MODE button until the display shows
drA.
2. Press SELECT button.
d.PLu is displayed.
3. Press SET button. An additional drain volume can be set.
Setting range: 0-99 seconds
(alternating display d.PLu and value)
It is set to 0 as default.
4. Press SELECT button.
d.Con is displayed.
5. Press SET button. The feature draining process under
tension can be switched on or off.
on --> switch on function
oF --> switch off function
The feature is switched off as default.
6. Press SELECT button.
d.Add is displayed.
7. Press SET button. The draining of the steam cylinder can
be switched on or off.
on --> Fswitch on feature. The steam cylinder is drained
every hour.
oF --> switch off feature
The feature is switched off as default.
8. Press SELECT button.
The drA programme restarts.
9. MODE-Taste drücken.
The drA programme is terminated.
17
BIA AeroFresh Plus