Citadel I Instructions D'assemblage page 24

13
Place the top seats on the top of the uprights. Center the top seat
between the two the uprights and be certain to evenly distribute the
ledges all around.
Be sure to have a vertical (plumb) upright before fixing the top seat.
ROUND SECTION
14
Snap the cap seat extension on the upright.
Then fix the front of the seat cap on the two font hooks of the seat
cap extension.
EXTENSION
SEAT CAP
UPRIGHT
TOP SEAT INSTALLATION
SCREW ''Z''
TOP SEAT
UPRIGHT
SEAT CAP INSTALLATION
FIX THE FRONT
HOOK FIRST
Secure the top seat in place using four (4) screws "Z".
Same installation procedure for the straight section.
STRAIGHT SECTION
Pivot the seat cap until it snaps onto the inside edge of the top seats.
Same installation procedure for the straight section.
SEAT CAP
SCREW ''Z''
TOP SEAT
BUTTRESS
POST