Setting The Cooking Time - Gorenje BO7386BX Notice D'utilisation

Table des Matières

Publicité

The program timer can be used to program the oven operation in three ways:
• Cooking time setting – immediate start of oven operation; after a set period of time, the oven is
turned off automatically.
• Cooking end time setting – the time at which oven operation is to end is set.
• Delayed start setting – automatic start and end of oven operation at a selected time.

Setting the cooking time

With this program mode, the duration of oven operation is set (cooking time). Maximum setting
allowed is 10 hours.
• Press the (A) sensor key to select the symbol (1). Use the (B) and (C) sensor keys to set the
duration / cooking time.
• Turn on the oven (use the corresponding oven knobs to set the operation mode and
temperature). After the expiration of the set time, the oven will automatically stop operating (end
of cooking time). An intermittent beep will sound, which can be stopped by pressing any key; if
no key is pressed, the beep stops after one minute.
• The symbol (1) and the sign (_:_ _) will fl ash. If you wish to resume cooking, press the (A)
sensor key and set a new duration if necessary.
Setting the cooking end time
This mode allows you to set the time at which the oven should stop operating. Maximum setting
allowed is 10 hours relative to the current time of day.
• Make sure the current time of day is set correctly.
• Use the (A) sensor key and select the symbol (2). The current time of day is indicated on the
display. Press the (B) and (C) sensor keys to set the cooking end time.
• Turn on the oven (use the corresponding oven knobs to set the operation mode and
temperature). The oven starts to operate immediately and stops operation at the set time. An
intermittent beep will sound, which can be stopped by pressing any key; if no key is pressed, the
beep stops after one minute.
• The symbol (1) and the sign (_:_ _) will fl ash. If you wish to resume cooking, press the (A)
sensor key and set a new duration if necessary.
Setting the oven delayed start
With this operation mode, two settings have to be made: cooking time (duration of oven operation)
and cooking end time (tie at which the operation should stop).
Cooking end time can be delayed by a maximum of 24 hours relative to the current time of day.
• Make sure the current time of day is set correctly.
• First, set the cooking time: Press the (A) sensor key to select the symbol (1). Use the (B) and (C)
sensor keys to set the duration / cooking time.
• Then, set the cooking end time: Use the (A) sensor key and select the symbol (2). (A sum of the
current time of day and the oven operation time is automatically shown on the display). Press the
(B) and (C) sensor keys to set the cooking end time.
• The timer will wait for the start of the cooking – both symbols (1 and 2) are lit.
• Turn on the oven (use the corresponding oven knobs to set the operation mode and
temperature). At the corresponding time, the oven starts operating automatically (the symbol (2)
goes off upon the start of operation), and switches off when the set cooking time has elapsed. An
intermittent beep will sound, which can be stopped by pressing any key; if no key is pressed, the
beep stops after one minute.
6

Publicité

Table des Matières
loading

Table des Matières