Symbols - Ryobi P716 Manuel D'utilisation

The following signal words and meanings are intended to explain the levels of risk associated with this product.
SYMBOL SIGNAL
DANGER:
WARNING:
CAUTION:
CAUTION:
Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper in-
terpretation of these symbols will allow you to operate the product better and safer.
SYMBOL
Safety Alert
R e a d
Manual
Hot Surfaces
Wet Conditions Alert
Recycle Symbols
V Volts
min Minutes
Direct Current
n o
No Load Speed
.../min Per Minute
WARNING:
To avoid serious personal injury, do not attempt to use this product until you read thoroughly and understand completely
the Operator's Manual. If you do not understand the warnings and instructions in the Operator's Manual, do not use
this product. Call Customer Service for assistance.

SYMBOLS

MEANING
Indicates an imminently hazardous situation, which, if not avoided, will result
in death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided, could result
in death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided, may result in
minor or moderate injury.
(Without Safety Alert Symbol) Indicates a situation that may result in property
damage.
NAME
Indicates a potential personal injury hazard.
O p e r a t o r 's To reduce the risk of injury, user must read and understand operator's
manual before using this product.
To reduce the risk of injury or damage, avoid contact with any hot
surface.
Do not expose to rain or use in damp locations.
This product uses nickel- cadmium (Ni-Cd) and lithium-ion (Li-ion)
batteries. Local, state or federal laws may prohibit disposal of batteries
in ordinary trash. Consult your local waste authority for information
regarding available recycling and/or disposal options.
Voltage
Time
Type or a characteristic of current
Rotational speed, at no load
Revolutions, strokes, surface speed, orbits etc., per minute
SAVE THESE INSTRUCTIONS
4 — English
DESIGNATION/EXPLANATION