LENCO SPB-260 Mode D'emploi page 4

12. Do not use this device when condensation may occur.
13. Although this device is manufactured with the utmost care
and checked several times before leaving the factory, it is
still possible that problems may occur, as with all electrical
appliances. If you notice smoke, an excessive build-up of
heat or any other unexpected phenomena, you should
disconnect the plug from the main power socket
immediately.
14. This device must operate on a power source as specified on
the specification label. If you are not sure of the type of
power supply used in your home, consult your dealer or
local power company.
15. * The socket outlet must be installed near the equipment
and must be easily accessible.
16. * Do not overload ac outlets or extension cords.
Overloading can cause fire or electric shock.
17. * Devices with class 1 construction should be connected to
a main socket outlet with a protective earthed connection.
18. * Devices with class 2 construction do not require a earthed
connection.
19. Keep away from rodents. Rodents enjoy biting on power
cords.
20. * Always hold the plug when pulling it out of the main supply
socket. Do not pull the power cord. This can cause a short
circuit.
21. Avoid placing the device on any surfaces that may be
subject to vibrations or shocks.
22. To clean the device, use a soft dry cloth. Do not use
solvents or petrol based fluids. To remove severe stains,
you may use a damp cloth with dilute detergent.
23. The supplier is not responsible for damage or lost data
caused by malfunction, misuse, modification of the device
or battery replacement.
24. Do not interrupt the connection when the device is
formatting or transferring files. Otherwise, data may be
corrupted or lost.
25. If the unit has USB playback function, the usb memory stick
should be plugged into the unit directly. Don't use an usb
extension cable because it can cause interference resulting
in failing of data.
4